2GPM Ethanol Recovery Pump for Vacuum
$6,000.00 – $7,400.00
Remove solvent with these pumps without having to break vacuum!
The 2GPM Solvent Recovery Pump is a magnetically coupled pump with peek gears for low viscosity (ie solvent compatibility). A magnetic drive coupling eliminates the shaft seal, increasing vacuum potential. No more down time while you remove solvent! This pump works great with Rotovaps or Falling Film Evaporators.
Product Details:
- All components are UL listed
- Motor & on/off switch are C1D2 Explosion Proof
- 2 Gallons per minute Fixed Speed or a Variable Frequency Drive
- 1.5” Tri-Clamp ports (attach your own hosing)
Note: VFD option is NOT C1D2 rated, and must be located in a safe area.
Please contact [email protected] if you need an explosion-proof enclosure for the VFD./
Lead time as of 09/2021: 1-2 weeks from date of purchase.
Spec Sheet
PUMP FOR ETHANOL 2 GPM
1. Assuming the equivalent of 15″ Hg. Inlet Condition or
508 mbara
2. Assuming a fluid viscosity of 1.32 mPas or 1.32 cP
3. Assuming a 10 PSI Discharge Pressure or less
ESTIMATED PUMP SPEED: 1735 RPM
MISC STAINLESS STEEL MAG-DRIVE PUMP
4030-450-ZK-NEMA56C
PUMP DETAILS:
ROTATION: CCW FACING FLANGE END
DISPLACEMENT: 4.5CC/REV
PORTS: 1/2″ BSP(FEMALE)-SIDE LOCATION
MAX INLET PRESSURE: 89 BAR
OP TEMP RANGE: -20°C-130°C
MATERIALS:
PUMP BODY: 316L STAINLESS STEEL
GEARS & BUSHINGS: PEEK MOD.
SHAFTS: 316Ti STAINLESS STEEL
STATIC ORINGS: PTFE
MAG COUPLING: MAX 2.0 Nm, Sm2Co17
ENCAPSULATED IN 316L STAINLESS
*INCLUDES: BELLHOUSING AND MOTOR HUB TO
MOUNT NEMA 56C MOTOR FRAME
MOTOR 3/4 HP, 1750 RPM, 56 C FRAME
EXPLOSION PROOF, INVERTER DUTY
CLASS I, GROUP D: CLASS II
BAL/IDXM7010
Materials Chemical Compatibility:
PEEK: https://www.calpaclab.com/polyetherether-ketone-peek-chemical-compatibility-chart/
PTFE: https://www.calpaclab.com/teflon-ptfe-compatibility/
Stainless Steel: https://www.calpaclab.com/stainless-steel-chemical-compatibility-chart/
Pump certifications: UL Listed for Hazardous Locations
OSHA Class: C1DII
ON OFF SWITCH
| C1D1 Explosion Proof Momentary Push Button Switch | Ratings/Approvals |
| Listing: United States | Listed for United States |
| Dimensions: 5.1″-L x 5.875″-W x 5.25″-H | Class I, Divisions 1 & 2, Groups B, C, D |
| Weight: 5 lbs | Class II, Division 1, Groups E,F,G |
| Voltage Rating: 600 Volts Max | Class II, Division 2, Groups F & G |
| Current Rating: 10 Amps Max @ 600V | Class III, Divisions 1 & 2 |
| Switch Type: Momentary Push Button | NEMA 3 |
| No. of Switches: 2 | NEMA 7, Groups C, D |
| Switch Labels: Start / Stop | NEMA 9, Groups E, F, G |
| Materials: Box: Malleable Iron / Switch Cover: Cast Copper Free Aluminum Alloy | |
| Insulation: Integral Bushings in Conductor Openings | |
| Mounting: External Mounting Lugs on Body | |
| Configuration: Feed Thru / Dead End | |
| Hub: 3/4″ NPT | |
VFD OPTION SPECIFICATIONS (ONLY FOR VFD OPTION)
| Explosion Proof Variable Frequency Device | Features/Ratings |
| Unit Type: 1 Phase Input/3 Phase Output Delta, 3 Wire Variable Frequency Device | Class I, Divisions 1&2 Groups B,C,D |
| Dimensions: 13.25″ x 17.25″ x 8.70″ | Class I, Zones 1&2 Groups IIB+H2,IIA |
| Weight: 52 lbs | Class II, Divisions 1&2 Groups E,F,G |
| Input Voltage: 1 Phase 220-240V AC | Class III |
| Output Voltage: 3 Phase 220-240V AC | Type 3, 4, 4X |
| Output Current: 4.7 Amps | CENELEC/ATEX/IEC Ex |
| Operating Frequency: 0 to 400 Hz | Ex d IIB + H2 T5 or T6 |
| Kilowatts: 0.75kw | Ex tD A21 IP66 |
| HP: 1 | Tamb = + 60°C |
| Speed Regulation: 1:100 | 1 Phase Input/3 Phase Output Delta, 3-Wire Configuration |
| Speed Control Accuracy: =±0.5% of rating synchronous speed | Automatic Energy Save Running |
| Frequency Resolution: Analog setting: 0.1% of max frequency; Digital setting: 0.01Hz | Automatic Current Limiting |
| Frequency Precision: Digital setting: 0.01% max, Analog Setting: Max frequency X 0.2% max | Automatic Voltage Regulation |
| Torque boost: Automatic torque boost; manual torque boost: 0.1%~30.0% | LED Display |
| Communication Terminal: RS485 communication interface | |
| Control Mode: V/F Control; Sensorless Vector Control | |
| Overload Capacity: 150% @ 60s, 180% @ 3s | |
| Operating Temp: –10°C to +40°C | |
| Max Operating Humidity: 95% (Non Condensing) | Special Orders- Requirements |
| Materials: Copper-free Aluminum, Stainless Steel (Hardware) | Contact us for special requirements |
| Finish: Aluminum Lacquer Paint Finish | |
| Mounting: Surface | |
| Hubs: – | |
| Color: Grey |
COVER FOR ON/OFF SWITCH
Description: The Explosion Proof Push Button Switch Cover has been designed for use with the Explosion Proof Start/Stop Switch. This cover is comprised of a durable aluminum face plate, as well as, both start/stop switches.