How Does a Solvent Recovery System Work?

How Does a Solvent Recovery System Work?

Solvent recovery pumps allow operators to take advantage of the solvent leftover from the distillation process. Obtaining a system that abides by C1D1 guidelines is critical during processing. Let’s look at exactly how solvent recovery systems work and how our pumps follow good manufacturing practices (GMP).

How Does a Solvent Recovery System Work?

The volatile and nonvolatile solutions within a solvent separate through the distillation process. That solution then undergoes a boiling process, and the condensed vapors convert to a liquid form in a separate reservoir. Temperature ranges vary for differing contaminants and soils; oils require a higher temperature than a solvent.

Why You Should Use a Solvent Recovery System

The recovery systems act as solvent recyclers by removing debris, oils, and soils throughout the distillation process and making the cleaning solvents reusable. This reduces the need to purchase solvents and continually decreases chemical waste. Some of the solvents a recovery system can recover and recycle include:

  • Acetone
  • Terpenes toluene
  • Hexane
  • Isopropyl alcohol
  • Mineral spirits

Beaker & Wrench Solvent Recovery Systems

We offer three different variations of the solvent pump. Each contains its own specifications to meet all processing needs and requirements, and all adhere to C1D1 guidelines.

  • Chemical-duty diaphragm pump: This pump requires an air compressor for operation. The maximum temperature runs up to 200 degrees Fahrenheit, with maximum operating pressure at 100 psi.
  • Explosion-proof oil pump: This pump follows C1D2 guidelines with customizable mounting. It’s critical to specify the machine attachment to ensure the inlet adaptor is accurate. The voltage compatibility ranges from 115 to 240.
  • Ethanol recovery pump for vacuum. The on/off switch and motor are explosion proof, abiding by C1D2 guidelines. This pump allows you to recover solvents through a magnetic coupler feature; the coupling increases the vacuum’s potential and eliminates a shaft seal.

Contact Beaker & Wrench today to further discuss how solvent recovery systems work. We follow good manufacturing practices for all equipment specifications.

Translate »